Shell lubricants and greases
copyright (c) 2010 all rights reserved Epoxy Oilserv Nigeria Limited
Epoxy Oilserv is The authorized Distributor of  Shell Lubricants below is Shell Range of products please call on us for the Data sheet of any desired Lube



Shell offers an extensive line of high-performance oils, greases and fluids. Every Shell lubricant is engineered and tested to meet or exceed the toughest performance standards. As a
result, Shell lubricants have been put to work across the world -- protecting engines and machinery from heat, wear, dirt and other life-threatening conditions.
SHELLL LUBRICANTS                                                                                

Automatic transmission fluids)ATF FLUIDS

DONAX® TA
Shell Donax® TA is a multipurpose torque converter and hydraulic fluid meeting

Allison Division of GMC (Allison) Type C-3 heavy duty power shift transmission fluid specification for use in a wide variety
of automotive, industrial, and off-highway equipment.  

DONAX® YB
Shell Donax® YB oils are designed to meet the demanding requirements of modern transmission, final drive, oil
immersed brake and hydraulic systems fitted to heavy-duty off-road equipment. Specially formulated, they meet the
Caterpillar TO-4 specification as well as the Allison C-4 requirements for transmission and drive train fluids and are
available in SAE viscosity grades 10W, 30, 50 and 60.





Shell Engine oil


Distillate Fuel Engines

Shell Rimula Oils (R1-R7)

Shell Rimula oils are quality engine oils for the lubrication of stationary andoff-highway trunk-piston engines operating on distillate fuels. Shell Rimula oils provideshigh cleanliness levels and engine reliability. The Rimula range meets various performancelevels from API CD to CI-4, are available in both monograde and multigrade viscosities andare approved by most OEM's.

Shell Gadinia Oils

Shell Gadinia oils are premium quality diesel engine lubricantsspecially designed for main propulsion and auxiliary marine trunk piston engines burningdistillate fuels. Shell Gadinia oils meets
API CF performance classification.

Heavy Fuel Engines

Capinus HD40 fluids
Shell Argina Oils

Shell Argina oils are premium quality lubricants designed for mediumspeed trunk piston diesel engines burning residual fuels. They have had a reputation ofproviding very high standards of
engine reliability and cleanliness. The Argina range hasbeen continuously upgraded and extended to keep pace with technical advances, includingmodern designs with ultra-low oil
consumption. Shell Argina oils are available in 20, 30,40 and 50 TBN and meets API CF performance classification.

Shell Alexia Oils

Shell Alexia 50 oil is Shell's main cylinder oil for low (slow) speed crossheadengines. It has been recently upgraded to provide excellent cleanliness and load carryingin the latest high output
long stroke engines, even operating at 100% load in power plantduty.

Shell Melina Oils

Shell Melina oils are 'system' oils, for the separate crankcase lubrication of lowspeed engines. They are designed for use with Alexia and can work safely with the highlevels of inter-
contamination which occur in engines with high boost pressures.

Natural Gas Engines

Shell Mysella Oils

Shell Mysella oils are a wide range of specialist lubricants, from ashless productsthrough to high ash types. They cater for the demands of both 2 and 4 stroke spark-ignitedand dual fuel (pilot
fuel) engines. The range includes products designed for both moderateand high oil stress engines, to minimise deposits, detonation and fouling and alsoincludes products able to protect
engines running with 'sour' gases, such as sewage and fill gas


Shell Hydraulic Oils
Shell Tellus Oils

Shell Tellus oils are premium quality, high performance hydraulic oils designed and developed for use in hydraulic systems. They contain advanced additives to provide robust and reliable
protection in even the most demanding of hydraulic systems. Benefits include outstanding anti-wear, good water separation and superior filterability performance. Available in ISO VG 32, 46, 68
and 100.

TELLUS® Oils T
Shell Tellus® T Oils are available in six ISO viscosity grades 15 through 100. These oils are blended with a carefully
selected viscosity index (VI) improver in severely hydroprocessed Group II base oils to give a high VI without excessive
loss of viscosity from mechanical shearing. Shell Tellus Oils T, therefore exhibit less change in viscosity with temperature
than conventional hydraulic oils. In addition, Shell Tellus Oils T are compounded to give anti-wear performance,
oxidation resistance and protect against rust and
corrosion.                               
                                 

see datasheet
Shell tellus 15
shell tellus 32
shell tellus 46
shell tellus 68

see data sheet
shell tellus T Oil    
Shell Irus Fluids

Shell Irus is a range of advanced fire resistant hydraulic fluids. They contain powerful additives to enhance their anti-wear, anti-corrosion and anti-oxidation properties and are available in
various fire-resistant categories including HFA, HFB, HFC, HFDU and HFDR.


Shell Gear Oils
Shell Omala Oils

Shell Omala Oils are premium quality, lead-free, extreme pressure oils designed primarily for the lubrication of heavy duty industrial gears. Their high load carrying capacity and anti-friction
characteristics combine to offer superior performance in gears and other industrial applications. They are formulated using high viscosity index, solvent refined, base oils and incorporate a
special sulphur-phosphorus additive to provide an extreme pressure performance significantly better than that provided by leaded gear oils. Available in ISO VG 68, 100, 150, 220, 320 and 460.


Shell Omala Oils HD

Shell Omala Oils HD are based on the highest quality synthesized hydrocarbon fluids available. These base fluids, combined with specially selected additives, offer a lubrication performance
far superior to that of gear oils manufactured from conventional petroleum mineral oils.

Shell Compressor Oils
Shell Corena Oils P

Shell Corena P
is a premium quality reciprocating compressor lubricant. It is based on a blend of Shell XHVI and specially selected base oils to provide a level of performance approaching
that of synthetic oils. Benefits include extended service life and good anti-foam and air-release properties.

Shell Corena Oils S

Shell Corena S
is a premium quality lubricant developed for the lubrication of rotary sliding vane and screw air compressors. It is based on a blend of high viscosity index, solvent refined base
oils and carefully selected additives. Benefi
ts include extended service life and good anti-foam and air-release properties.



        Shell turbine oils
                       



 Shell Grease Lubrication
AeroShell® Grease 33
AeroShell® Grease 33 is a multipurpose airframe grease specifically developed for Boeing to be used in roller bearings,
actuator screws and other airframe equipment. It is made with synthetic base oil and a Lithium Complex thickener, which
provides enhanced corrosion resistance and load-carrying capacity. It has a useful temperature range of -100° F ( 73°
C) to +250° F (+121° C). AeroShell Grease 33 is qualified under MIL-PRF-23827C and Boeing Specification BMS 3-33A

Albida® Grease LT 1
Albida® Grease LT 1 is a premium quality, mineral oil based, multipurpose lithium complex extreme pressure (EP)
grease. It is formulated especially for low temperature applications.

Albida® Grease SD 2
Albida® Grease SD 2 is a premium quality, mineral oil based, multipurpose lithium complex extreme pressure (EP)
grease. It is suitable for both commercial and industrial applications.

ALBIDA® LC Greases  
Application: Range of synthetic fluid greases for use in heavy-duty, high temperature industrial applications
Benefits: Viscosity grade synthetic base oil blend, wider operating temperature range, improved oxidation properties.

ALBIDA® PP 1 Grease
Application: Grease lubricated pumps, conveyors and most plant machinery
Benefits: Premium quality, multipurpose grease for heavy-duty high temperature use.

ALVANIA® EP Greases
In NLGI Grades 0, 1, 2, and 3 New non-leaded, extreme pressure versions of Shell's popular Alvania Greases for on-
and off-highway equipment, construction equipment and industrial applications. Application: Grease lubricated pumps,
conveyors and most plant machinery
Benefits: Increased load-carrying properties, excellent saltwater protection, and antirust properties.


Alvania® Grease RL
Premuim quality, multipurpose grease


RETINAX® HD Grease 1
Retinax® Grease HD is a premium mixed soap thickened grease made with a heavy base oil, tackifiers and selected
additives. The combination of lithium and calcium soaps gives this grease its excellent mechanical stability, while the
heavy base oil provides superior resistance to water washout. The careful selection of additives gives Retinax Grease
HD excellent EP/load carrying ability, oxidative stability, rust protection and metal surface adherence. Retinax Grease HD
is available in NLGI Grades 1 and 2.  

RETINAX® HD Grease 2
Retinax® Grease HD is a premium mixed soap thickened grease made with a heavy base oil, tackifiers and selected
additives. The combination of lithium and calcium soaps gives this grease its excellent mechanical stability, while the
heavy base oil provides superior resistance to water washout. The careful selection of additives gives Retinax Grease
HD excellent EP/load carrying ability, oxidative stability, rust protection and metal surface adherence. Retinax Grease HD
is available in NLGI Grades 1 and 2.

Retinax® Greases
Retinax® Greases CMX and SDX are Shell’s multipurpose lithium complex high dropping point, extreme pressure (EP)
greases containing molybdenum disulfide (moly). They are primarily intended for construction, mining and agricultural
equipment applications. Retinax CMX Grease 1 and Grease 2, and SDX Grease 2 greases are recommended for use in
applications requiring a Caterpillar Multipurpose Grease product.

Rhodina® Grease SDX 2
Rhodina® Grease SDX 2 is a heavy-duty grease thickened with an anhydrous 12-hydroxy stearate thickener and
formulated with graphite and molybdenum disulfide (moly) for extreme pressure performance.



Shell Thermia B (heat Transmission fluid) Industrial HTF
Shell Industrial HTF Heat Transfer Fluids are a series of conventional technology, high quality, industrial
coolant/antifreeze and heat transfer fluids




Shell is the leader in grease technology and also the largest grease manufacturer. We posses up to date and intimate understan
ding of grease action, permitting us to apply our in depth knowledge to produce grease of varying rheologies to suit specific purposes. The decades of cutting edge R&D have resulted in a range of proven, modern and leading edge greases with outstanding lubrication characteristics.

Shell Alvania Greases

Shell Alvania is a range of high performance greases, ideal for a variety of industrial applications. Choose the right Alvania grade for your bearings operating condition and temperature and
enjoy improved shock protection, longer service life and reduced strain and wear on your machinery.

Shell Albida Greases

Shell Albida is a range of high performance lithium complex greases designed to operate under extreme pressure in high temperature environments. Providing excellent anti-corrosion and anti-
wear protection, Albida greases can be used in a variety of industrial applications where additional resistance to shock loading is required.

Shell Stamina Greases

Shell Stamina is a range of high-temperature and heavy-duty greases. Stamina offers long-lasting, stable protection and provides optimal bearing lubrication - even at the highest operating
temperatures. Stamina greases are available in a wide range to suit the speed and load of your bearings.

Shell Cassida Greases

Shell Cassida is a range of greases designed for the lubrication of bearings in machines used for food processing and packing. Shell Cassida range meets the high standards for lubricants
used in applications where there is a risk of incidental food contact - including those of the United States Department of Agriculture (USDA), Category H1 products and the Food & Drug
Administration (FDA).



Shell Bearing Oils
Shell Morlina Oils

Shell Morlina is a range of lubricants for a wide variety of applications. The lower viscosity oils (ISO VG 10) can be used as advanced spindle oils. The higher viscosity grades are premium
quality, heavy duty, bearing and circulating oils.

Shell Vitrea M Oils

Shell Vitrea Oils M are industrial bearing and circulating oils blended from HVI, solvent refined, paraffinic mineral oils for the lubrication of heavy duty industrial bearings and circulating systems.
Meets Morgan Construction Company performance specifications for - Morgoil roll neck bearings. Available in ISO VG 100, 150, 220, 320, 460 and 680.

Shell Refrigerator Compressor Oils
Shell Clavus Oils

Shell Clavus is a highly refined naphthenic mineral oil with excellent low temperature properties. Performance features include high film strength, high chemical stability, special flow properties,
low floc point and good thermal stability.

Shell Clavus range also includes R134a compatible synthetic refrigerator compressor oils.

Shell Metal Working Fluids
The cutting or metal working fluid plays a critical part in metal removal or forming operations. It has two main functions. The first is that of cooling both the work piece and cutting tool, to conduct
heat away from the cutting and forming areas to prolong tool life and prevent unwanted metallurgical changes or cracking of the workpiece or cutting tool. The second function is that of
lubrication, to reduce friction between forming tool and workpiece or between chip and cutting tool. This reduces heat generation and the energy involved in the process, and again improves
tool life and surface finish.

With increasing demands for improved productivity and quality from modern production engineering operations, higher and higher performance levels are expected from metal working fluids. At
Shell, we have concentrated on efforts on maximising tool life and achieving consistently high standards of surface finish, to reduce downtime and maintenance costs and to increase
productivity and achieve optimum quality.

Correct maintenance of fluid is as important as the selection of fluid for system. We help you adopt a planned program for receiving, storing and using cutting fluids to help ensure better
management of the fluid sump through advice and help in

a. Correct storage of fluid

b. Optimum stock control

c. Regular sample checks

d. Proper sump cleaning procedures

e. In case of soluble oils, start from input water quality

f. Proper filling, topping up and maintenance procedure

We offer a comprehensive range of products and services for metal working operations:

Soluble Cutting Fluids

Shell Lubricool Fluids

Shell Lubricool Fluids are designed to exceed the rigorous demands of today's manufacturing requirements. This new range of water miscible cutting and grinding fluids have been developed
using the latest in biostable and additive technology for extended sump life, low maintenance and cost effectiveness. Lubricool products have excellent tramp oil rejection properties. They are
environment and operator friendly and help maintain a clean working environment. Shell Lubricool Fluids are color coded for easy selection of products for use in different operations.

Shell Lubricool Blue

Semi synthetic and biostable, forms a stable translucent blue emulsion. Recommended for use in CNC machines and for turning, milling, drilling and grinding applications.

Shell Lubricool Green SS

Semi synthetic, biostable and low oil content soluble oil. Forms a stable, translucent emulsion. Recommended for grinding and machining operations.

Shell Lubricool White

Semi synthetic and biostable, forms a stable milky white emulsion. It has been specifically developed for machining aluminum and its alloys in high performance machining applications, giving
excellent surface finish and dimensional accuracy.

Shell Lubricool Green

Fully synthetic and biostable, forms a fluorescent green transparent solution. Recommended for grinding applications.


Shell Dromus B

Premium conventional mineral oil with biocides, forms a stable milky emulsion. It is multifunctional and is widely used for aluminum machining.


Neat Cutting Oils

Shell Macron Oils

Premium quality oils based on hydrotreated mineral oil with a low aromatic content. A well balanced combination of polar, mild extreme pressure and antiwear additives provide good lubricity and
cutting performance. They are designed for mild, medium and severe machining operations on a variety of ferrous, light and yellow metals.

Shell Garia Oils

Premium quality oils based on hydrotreated mineral oils with low aromatic content. They are designed for medium to severe machining on a variety of metals.


We offer the comprehensive services for optimising the metal working operations.

1. Shop Audit

2. Customer Training

3. Guide to Planned Program

4. Coolant Management Services

5. Coolant management Kits

6. Total Fluid Management

Back to TopBack to Top

Shell Food Grade Lubricants
Shell Cassida Lubricants

Shell offers a fully approved and recognised range of food quality lubricants. Shell Cassida range meets the high standards for lubricants used in applications where there is a risk of incidental
food contact - including those of the United States Department of Agriculture (USDA), Category H1 products and the Food & Drug Administration (FDA). Shell Cassida range includes both oils
and greases.

Shell Thermic Fluids
Shell Thermia Oils

Shell Thermia Oils are low viscosity heat transfer fluids carefully selected from solvent refined, high viscosity index mineral oils chosen for their ability to provide superior performance in indirect
closed fluid heat transfer systems operating at a wide range of bulk temperatures.

Shell Electrical Oils
Shell Diala Oils

Shell Diala is an extensive range of transformer and switchgear oils for a variety of duties and complies with US, European and international specifications. Both inhibited and non-inhibited, and
both gas-absorbing and gas-evolving product types are available.

Shell Powermax Oils

Shell Powermax Oil SF is a top-of-the range non-inhibited insulating oil manufactured from specially refined naphthenic base stock. It offers very high oxidation stability, good dielectric strength
& excellent low temperature properties without the use of pour point depressants. Shell Powermax SF is suitable for use in transformers, capacitors, oil filled switches and cables and as insulator
and arc extinguishing agent in switchgear and circuit breakers. Meets IS 335 and IEC 296 Class-I specifications.




For further information about Shell Products and Services Please Contact Us.
Epoxy Oilserv product listings for global enquiry (download)